STL- Model TH-CSF3015 Cantilever Type Fibre Optic Laser Cutter, 1500mm x 3000mm Table, Offered in 500W ~ 4000W subject to cusotmers requirements.
Offering Our STL Fibre Optic Lasers in Both Gantry & Cantilever. Fibre Optic Lasers offer a Superior Operating speed – Faster than CO2 lasers in thin materials as the laser can be absorbed quickly slight lead in speed when cutting with Nitrogen (fusion cutting)
High Quality Finishes on thinner material, low cost running & minimal consumables! Best of all, there very affordable!
Fiber laser technology has gradually replaced YAG and Co2 laser technology due to excellent quality, low operation cost, fast cutting speed, high conversion rate between electricity and laser.
Our fiber laser cutting machine, model: TH-GSF3015-500 is equipped with imported IPG laser generator -100, 000 working hours which is suitable for metals, including stainless steel, carbon steel, aluminium cutting.
Specs below based on 1000W machine
Specifications
?Model: TH-GSF3015-500
?Construction: Cantilever
?Wave Length: 1070nm
?Machine Power: 1000W:
?Cutting Table:
?Table Size: X & Y: 1500mm x3000mm
?Travel of X Axis: 3000mm
?Travel of Y Axis: 1500mm
?Travel of Z Axis: 120mm
?Gantry Type Construction
?Max. Table Load: 500Kg
Accuracy:
?Positioning Accuracy for X & Y Axis: +/- 0.03mm
?Repeatability Tolerance for X , Y & Z Axis: +/- 0.03mm
Speed:
?Travel Speed Max.: 60m min.
?Linkage Speed Max.: 72m min.
Capacities:
?Mild Steel: 12mm,
?Stainless: 5mm:
Standard Accessories:
?LASERCUT Version V6.0 Control System
?Lasermech Cutting Head
Components:
?Fibre Laser Source: IPG
?Control System: LASERCUT
?Laser Cutting Head: Laser Mech
?Water Cooling System: Sunrise 1.5P
What You Need to Supply:
Power Supply:
?100KVA
?Stability of 3-phase Voltage +-5%
Compressed Air:
?Volume: 1m3/min.
?Pressure: 7kg/cm
?Dew point less than 5 Degrees C.
?Air to be filtered.
Foundation:
?Laser to be sited on one slab / not over expansion joints.
?Site Temperature:
?Temperature: 5~35 Degrees C.
?Humidity: 70%
IT:
?Notebook or Desktop PC for programming use.
Machine Dimensions :
?Weight: 5500Kg
Warranty:
?12 Months
IPG fiber laser source, 100000 working hours
Low Electricity Consumption and Free Maintenance
a. Save water, electricity and costs
b. No consumables, very economical
Offering Our STL Fibre Optic Lasers in Both Gantry & Cantilever. Fibre Optic Lasers offer a Superior Operating speed – Faster than CO2 lasers in thin materials as the laser can be absorbed quickly slight lead in speed when cutting with Nitrogen (fusion cutting)
High Quality Finishes on thinner material, low cost running & minimal consumables! Best of all, there very affordable!
Fiber laser technology has gradually replaced YAG and Co2 laser technology due to excellent quality, low operation cost, fast cutting speed, high conversion rate between electricity and laser.
Our fiber laser cutting machine, model: TH-GSF3015-500 is equipped with imported IPG laser generator -100, 000 working hours which is suitable for metals, including stainless steel, carbon steel, aluminium cutting.
Specifications
?Model: TH-GSF3015-500
?Construction: Cantilever
?Wave Length: 1070nm
?Machine Power: 1000W:
?Cutting Table:
?Table Size: X & Y: 1500mm x3000mm
?Travel of X Axis: 3000mm
?Travel of Y Axis: 1500mm
?Travel of Z Axis: 120mm
?Gantry Type Construction
?Max. Table Load: 500Kg
Accuracy:
?Positioning Accuracy for X & Y Axis: +/- 0.03mm
?Repeatability Tolerance for X , Y & Z Axis: +/- 0.03mm
Speed:
?Travel Speed Max.: 60m min.
?Linkage Speed Max.: 72m min.
Capacities:
?Mild Steel: 12mm,
?Stainless: 5mm:
Standard Accessories:
?LASERCUT Version V6.0 Control System
?Lasermech Cutting Head
Components:
?Fibre Laser Source: IPG
?Control System: LASERCUT
?Laser Cutting Head: Laser Mech
?Water Cooling System: Sunrise 1.5P
What You Need to Supply:
Power Supply:
?100KVA
?Stability of 3-phase Voltage +-5%
Compressed Air:
?Volume: 1m3/min.
?Pressure: 7kg/cm
?Dew point less than 5 Degrees C.
?Air to be filtered.
Foundation:
?Laser to be sited on one slab / not over expansion joints.
?Site Temperature:
?Temperature: 5~35 Degrees C.
?Humidity: 70%
IT:
?Notebook or Desktop PC for programming use.
Machine Dimensions :
?Weight: 5500Kg
Warranty:
?12 Months
IPG fiber laser source, 100000 working hours
Low Electricity Consumption and Free Maintenance
a. Save water, electricity and costs
b. No consumables, very economical
