The MI-X 20 G industrial front loader runs on gas with a maximum load capacity of 2 tonnes, and is suited to intensive use both indoors and outdoors. The innovative design will win its fair share of fans and it's easy to get up and running with the ergonomic controls.Accessibility is no problem with a large handle grip, anti-slip footstep and doors on both sides, whilst the driver's position has been designed with comfort in mind so long shifts are less exhausting. The cab is fully enclosed with an adjustable steering column, and visibility when performing manoeuvres has been optimised with the specially designed counterweight.
Technical characteristics -
Manufacturer:
MANITOU
Model Name:
MI-X 20 G
Power source:
Lpg
Operator type:
Sitting
Max. capacity:
2000 kg
Load center of gravity:
500 mm
Load distance, centre of drive axle to fork:
465 mm
Wheelbase:
1600 mm
Weight -
Service weight
3620 kg
Weight - on front axle (laden) / rear axle (laden)
4930 kg / 690 kg
Weight - on front axle (Unladen) / rear axle (Unladen)
1720 kg / 1900 kg
Wheels
Tyres type
Inflatable
Dimensions of front wheels
7.
Dimensions of rear wheels
6.
Number of front wheels / rear wheels
2 / 2
Number of drive wheels
2
Front wheel gauge
965 mm
Rear wheel gauge
973 mm
Dimensions
Height of overhead guard (cabin)
2115 mm
Seat height/stand height
1190 mm
Height of towing bar (coupling height)
355 mm
Overall length
3615 mm
Length to face of forks
2465 mm
Overall width
1155 mm
Overall width - Single wheels
1155 mm
Forks section / width / length
40 mm x 122 mm x 1150 mm
Fork carriage ISO 2328 (class/form) A/B
2A
Fork carriage width
1038 mm
Ground clearance below mast
115 mm
Ground clearance at centre of wheelbase
175 mm
Aisle Width for pallets 1000 x 1200 crossways
3865 mm
Aisle width for 800 x 1200 pallet lengthways
4065 mm
Turning radius
2200 mm
Internal turning radius (over tyres)
145 mm
Performances -
Travel speed (laden / unladen)
18.80 km/h-19.40 km/h
Lifting speed (laden / unladen)
0.47 m/s-0.55 m/s
Lowering speed (laden / unladen)
0.48 m/s-0.50 m/s
Drawbar pull (Laden / Unladen)
1680 daN / 1040 daN
Gradeability (laden / unladen)
20 % / 20 %
Service brake
Hydraulic
Engine
Engine brand / model
GCT (ex-Nissan) / K25
Engine power according to ISO 1585
35 kW
Rated speed
2400 Hz
Number of cylinders / Capacity of cylinders
4 - 2488 cm³
Energy consumption according to VDI cycle (Gas)
6.30 kg CO2/h
Miscellaneous -
Working hydraulic pressure for attachments
160 bar
Oil flow rate for attachments
72 l/min
Measured/guaranteed mean noise level at the ear of the operator
< 80 dB
Sound level at the driver's ear according to DIN 12 053
80 dB